Welcome toChina Printing Net
Add to Favorites |Chinese
Common breakdown reachs system of Chinese ink of printing machine water eliminat
From;    Author:Stand originally

1. gives Mo Gun to have nick
(1) screw carrying Chinese ink on the head comes back too closely, bolt carrying Chinese ink on the head comes forward Chinese ink razor blade is supporting to give Mo Gun. Exit screw giving black some;
(2) brim of the mouth before Chinese ink razor blade has a foreign body or the cut such as burr gives the circle outside Mo Gun, keep clear of or repair edge mouth eyewinker and burr.
2. carpenter's ink marker gives Mo Gun not to turn
(1) pin of fixed position of ratchet of axis of roller giving black becomes loose, pawl cannot drive axial roll;
(2) pawl fork ruptures or damage, cannot drive pawl to swing, should change pawl fork;
(3) pawl head ruptures, cannot block ratchet inside;
(4) two end block roller giving black dead, axis of roller of check fish ink stick two carry and repair.
3. offers Chinese ink inhomogenous
(1) roller giving black and clearance of Chinese ink razor blade are done not have smooth, should corrective roller giving black and clearance of Chinese ink razor blade;
(2) side of transmission of roller giving black holds force of brake apply the brake in the arms too small, adjust side of transmission of roller giving black to hold pressure of brake stage clip in the arms;
(3) the circle outside passing Mo Gun is out of shape as inhomogenous as contact of roller giving black, should change the roller that send handwriting or painting;
(4) the roller that send handwriting or painting and pressure of contact of roller giving black adjust undeserved, but readjust transmits Mo Gun and pressure of contact of roller giving black.
4. gives Mo Gun to cannot be shut
Position of fender of control of pawl of roller giving black undeserved or already wore away, can adjust the position or change fender.
5. sends handwriting or painting / water cannot stop
(1) the lever that send handwriting or painting bumps piece be stayed in by card, cannot resilient, should be checked and repair bumps piece;
(2) breakdown of circuit of the component that send handwriting or painting, check and build road of telegram in reply;
(3) the electromagnetism that send handwriting or painting piece breakdown, tear open next examinations, make its work normally.
Chinese ink of 6. divide evenly is undesirable
(1) ageing of roller of divide evenly Chinese ink or printing ink quality are bad to wait cause the surface to wear away, should change roller of divide evenly Chinese ink;
(2) pressure is adjusted between divide evenly Mo Gun undeserved or be out of shape, should adjust pressure or change roller of divide evenly Chinese ink.
The Chinese ink on 7. forme is abhorrent
(1) divide evenly Chinese ink is undesirable;
Previous12 Next

About us | Legal Notices | Sitemap | Links | Partner